|Place of Origin:||China|
|Certification:||CNAS Calibration certificate|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||15working days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Standard:||JIS, ASTM, CNS, GB||Warranty:||1 Year|
Salt Spray Test Chamber
Salt spray test chamber is applied to measure the reliability of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to different standards (JIS, ASTM, CNS, GB), neutral salt mist (NSS) and acidy salt spray test (CASS). This equipment can meet the requirements of the both.
Principle: Absorb the salt water by Bernoulli principle, and the salt water will be atomized by nozzle symmetrically, no block, no crystallize. The heater in the chamber keep the temperature.
Structure and material:
1) The chamber adopts PVC board, the thickness is 5mm, can bear 80℃.
2) The transparent lid is made by Acrylic board, the thickness is 6mm.
3) The saturated air barrel is made by SUS#304 stainless steel.
4) The test rack can be freely to adjust the angle.
1) Power off @ low water
2) Power off @ over heat
3) With alarming indicator
● Temperature requirement:
Lab:35~50℃ (NSS@35℃, CASS@50℃)
Air barrel: 47~63℃ (NSS@47℃, CASS@63℃)
Resolution accuracy: ±0.1℃
Control accuracy: ±0.1℃
Distribution Accuracy: ±2.0℃
|Power (single phase)||220V, 3KW, 50Hz||220V, 1.5KW, 50Hz||220V, 1.5KW, 50Hz|
|Accessories||V rack, nozzle, spray tower, NACL (2 bottles) and etc.|
|L sharp test rack||4 pieces|
|Standard measuring cylinder||1 piece|
|Temperature pointer||2 pieces|
|V Sharp test rack||6 pieces|
|Collector 80cm||1 piece|
|Glass nozzle||1 piece|
|NACL 500g||2 bottle|
|Power cable 2.5m||1 piece|