|Place of Origin:||China|
|Brand Name:||PEGO GROUP|
|Certification:||Third-Lab Calibration Certificate|
|Minimum Order Quantity:||1 set|
|Delivery Time:||20 working days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||50 sets/months|
|Standard:||IEC60950, IEC60335-1||Application:||Accessible Parts Of Solid Insulation Of Household Appliance|
|Working Power:||220V/50Hz||Control System:||PLC+ Touch Screen|
IEC60335-1 IEC60950 Scratch Tester / Abration Resistance Tester with a Hardened Steel Pin for Acessible Parts
Abration resistance tester is designed according to IEC60950 clause 220.127.116.11 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of household appliance and printed circuit boards, to ensure the material has sufficient strength to prevent penetration by sharp implements.
The scratch resistance test uses a hardened steel pin for scratching. The end of the steel pin should be tapered with a apex angle of 40°. The tip should be rounded with radius of 0.25 mm ± 0.02 mm.
When performing the scratch test, scratches were performed at a speed of 20 mm/s ± 5 mm/s in a plane perpendicular to the edge of the conductor. The steel pin should be properly loaded so that the hardened steel pin can apply a force of 10N ± 0.5N along its axial direction. The scratch interval should be at least 5mm and at least 5mm away from the edge of the sample.
This equipment adopts the control system of PLC+ touch screen, and the performance is stable. Rotating the work surface makes it easy to realize the scratch test in both directions.
|Scatching speed||0~25mm/s (adjustable)|
|Test times||0~9999 times (adjustable)|
|Scatching spacing||0~50mm (adjustable)|
|Working table||3600 rotation|
|Force applied||10N±0.5N (option: 30N±0.5N equip with 20N weights)|
|Scatching pin||Rounded with a radius of 0.25 mm ± 0.02 mm|
|Control system||PLC+touch screen|
|Drive mode||Stepping motor|