|Place of Origin:||China|
|Brand Name:||PEGO GROUP|
|Certification:||Third-Lab Calibration Certificate|
|Minimum Order Quantity:||1 piece|
|Delivery Time:||7 working days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||100 pieces/month|
|Standard:||IEC60335-2-11 Figure 101 And IEC6335-2-6||Material:||Polycarbonate And K Type Thermocouple|
|Force Applied:||4N||Shipment:||By Express|
IEC60335-2-11 figure 101 Surface Temperature Test Probe for Oven and Tumble Dryers
The probe for measuring surface temperature is designed according to the requirement of IEC60335-2-11 figure 101 and IEC6335-2-6. It’s mainly used to test the temperature rise of the front and side of the cooker, oven and tumble dryers, 4N force is applied according to the standard.
|Copper Sheet||Φ5mm*0.5mm (thickness)|
|Thermocouple||Φ0.3mm, K type made by OMEGA|
|Insulated Pipe||Polycarbonate, inner diameter 3 mm, outer diameter 5 mm|
|Handle||With 4N thruster|
1) . The test shall be carried out after the test corner test is completed.
2) . The equipment under test should be powered for 60mins or it reaches a steady state before test.
3) . The top of the probe was pressed against the surface of the device under test, and a 4 N force should be applied until the temperature was stable.