Sales & Support: Request A Quote
Home ProductsLampholder and Lampcap Gauges

Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball

Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball

    • Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball
    • Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball
    • Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball
    • Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball
  • Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball

    Product Details:

    Place of Origin: China
    Brand Name: PEGO
    Certification: CNAS Calibration Certificate
    Model Number: PG-BP01

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 piece
    Price: USD110-USD5000
    Packaging Details: Each in a black gift box then into a carton box
    Delivery Time: 15 work days
    Payment Terms: Western Union, T/T, MoneyGram
    Supply Ability: 10000sets/year
    Contact Now
    Detailed Product Description
    Standard: IEC60335, IEC60695-10-2 Material: Steel
    Warranty: 1 Year Service: OEM/ODM
    Condition: New

    Ball pressure test apparatus

    The ball pressure test apparatus is designed according to IEC60695-10-2, IEC60335, IEC60601, GB4706.1 and etc. the surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface with a force of 20 N. The test is performed in a heating cabinet at a temperature of 75°C ± 2°C. The ball is withdrawn after 1 h and the diameter of the impression made by the ball is measured. An impression greater than 2 mm in diameter constitutes a failure.

    Parameters:

    Ball diameter 5mm (R2.5mm)
    Test Pressure 20N±0.2N
    Material Stainless Steel

    Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball 

    Relative Products:

    Industrial Oven

    • Introduction:

    Oven is widely applied to the fields of motor, glass, ceramic, PC board, coating and etc. for the purpose of drying, preheat and finalize the design. The oven is consisted by working room, air supply device, Japanese control system, and protection system. Work with the ball pressure test apparatus can do the heating resistance test.

     

    • Parameter:
    • Temperature range: RT~220℃
    • Temperature fluctuation: ±1℃
    • Temperature uniformity:≦±2℃
    • Temperature deviation:±2℃
    • Working Size:

     

    volume Working size(mm)
    225L 600(W)*500(D)*750(H)
    420L 700(W)*600(D)*1000(H)
    800L 800(W)*800(D)*1200(H)

    Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball

    Discoloration Test Chamber

    1. Introduction

    Discoloration is a kind of aging phenomenon, it is may caused by light ray, ultraviolet, heat exposure, oxidation, strength, moisture, impurity and others. The discoloration test chamber adopts the bulb or tube and heat controller to simulate the nature environment, the white or light-colored specimens to be tested for discoloration are exposed to UV or UV/visible radiation periods of time, then to check the degrees of the color change of the specimen. The equipment can meet the requirements of ASTM-D1148, AATCC16-1998, HG/T 3689 and etc.

     

    2. Specification

    ● Outer material: 1.2mm cold-rolled sheet with stoving varnish

    ● Inner material: 1.2mm stainless steel #202

    ● Insulating material: Polyurethane foam

    ● Inner size (mm): 750 (H)*600(W)*500 (D)

    ● Outer size (mm): 1550 (H) *1050 (W)*900 (D)

    ● Capacity: 225L

    ● Temperature: R.T.~80℃

    ● Timer: 0~999h

    ● Controller: P.I.D.

    ● Lightsource: UV tube *1 piece

    ● Turntable: for specimen

    ● Weight: 120KG

    Outer material 1.2mm cold-rolled sheet with stoving varnish
    Inner material 1.2mm stainless steel #202
    Insulating material Polyurethane foam
    Inner size (mm) 750 (H)*600(W)*500 (D)
    Outer size (mm) 1550 (H) *1050 (W)*900 (D)
    Capacity 225L
    Temperature R.T.~80℃
    Timer 0~999h
    Controller P.I.D.
    Lightsource UV tube *1 piece
    Turntable for specimen
    Weight 120KG

    Calibrated IEC60335 IEC60695-10-2 Ball Pressure Test Device with 20N Pressure and 5mm Diamter Ball 

    Contact Details
    Pego Group (HK) Company Limited

    Contact Person: Ms. Alice

    Tel: 86-0795-3560528

    Fax: 86-0795-3560528

    Send your inquiry directly to us (0 / 3000)