Sales & Support: Request A Quote
Home ProductsTest Probes

Test Probes

(106)
China IEC60065 Test Probe Kits (Includes small finger Probe, jointed Test Finger, Rigid Test Finger, Test Hook) factory

IEC60065 Test Probe Kits (Includes small finger Probe, jointed Test Finger, Rigid Test Finger, Test Hook)

IEC60065 Test Probe Kits (Includes small finger Probe, jointed Test Finger, Rigid Test Finger, Test Hook) 1. Introduction The test probe kits are meet the requirement of IEC60065, includes jointed test finger, ... Read More
2019-08-13 12:06:48
China IS015717 Figure 2 75g Fragmentation Test Hammer for Glass Made by Tungsten Carbide factory

IS015717 Figure 2 75g Fragmentation Test Hammer for Glass Made by Tungsten Carbide

IEC60335-2-11 figure 101 Surface Temperature Test Probe for Oven and Tumble Dryers 1. Introduction The test hammer for fragmentation test having a head with a mass of 75g±5g and a conical tungsten carbide tip ... Read More
2019-08-13 12:00:35
China IEC 61032 Figure 14 Test Probe 31 25mm with CNAS Third-lab Certificate factory

IEC 61032 Figure 14 Test Probe 31 25mm with CNAS Third-lab Certificate

Test probe 31 Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste ... Read More
2019-02-20 16:41:25
China UL60950 Staindless Steel Wedge Probe for Safety Test of Paper Shredder Inlet factory

UL60950 Staindless Steel Wedge Probe for Safety Test of Paper Shredder Inlet

Wedge Probe Wedge probe is designed according to UL60950 figure NAF.2 and NAF.3, IEC60950 and IEC62368 figure V.4, it is for safety test of paper shredder inlet. Read More
2019-02-20 16:40:33
China IEC60529 IP2X Standard Finger Probe with 50N Thruster factory

IEC60529 IP2X Standard Finger Probe with 50N Thruster

Test Probe B for IP2X testing Introduction: Design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. This probe is intended to verify the basic protection ... Read More
2019-02-20 16:39:32
China IEC60529 IP3X Test Probe C diameter 2.5mm with 3N Thruster factory

IEC60529 IP3X Test Probe C diameter 2.5mm with 3N Thruster

Test probe C with 3N Thruster Introduction: Designed according to IC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc. This rod is intended to verify the protection of persons ... Read More
2019-02-20 16:38:28
China IEC60529 61032 IP4X Test Probe D 1.0mm without Thruster factory

IEC60529 61032 IP4X Test Probe D 1.0mm without Thruster

Test Probe D Introduction: Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3,IEC60065,IEC60598 and etc. This wire is intended to verify the protection of persons against access to ... Read More
2019-02-20 16:37:22
China IEC 61032 Short Test Pin Probe 13 with CNAS Third-lab Certificate factory

IEC 61032 Short Test Pin Probe 13 with CNAS Third-lab Certificate

Test probe 13 Introduction: It is designed according to IEC61032 figure 9. The pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see ... Read More
2019-02-20 16:36:19
China IEC 61032 Rigid Test Finger Probe 11  without Thruster factory

IEC 61032 Rigid Test Finger Probe 11 without Thruster

Test probe 11 with 50N Thruster Introduction: It is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to ... Read More
2019-02-20 16:35:19
China IEC 61032 Long Test Pin Probe 12 with CNAS Third-lab Certificate factory

IEC 61032 Long Test Pin Probe 12 with CNAS Third-lab Certificate

Test Probe 12 Introduction:It is designed according to IEC61032 figure 8. This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts ... Read More
2019-02-20 16:33:48
Page 1 of 11|< 1 2 3 4 5 6 7 8 9 10 >|